Lists

Tuesday, March 08, 2016

Sony IMX260 in Samsung Galaxy S7: Stacked or Not?

Chipworks publishes an update on Sony IMX260 dual pixel AF sensor, found in Samsung Galaxy S7:

"Our lab staff have completed the initial cross-sectioning work for our IMX260 project and we have a substantial update to share: the Sony IMX260 is, in fact, a stacked chip CMOS image sensor! As mentioned, we had expected to find through silicon vias (TSVs) consistent with Sony’s Exmor RS technology platform. Our early teardown results revealed what appeared to be a conventional Sony non-stacked back-illuminated (Exmor R) chip. After going deeper inside, we see that Sony is leading the digital imaging sector into an era of hybrid bonding. It’s not currently known if Sony considers this an extension of its Exmor RS platform, or if the IMX260 marks the first of a new (as of now unannounced) family of back-illuminated image sensors. For now we consider the IMX260 to be a 3rd generation Exmor RS chip.

Our cross-section reveals a 5 metal (Cu) CMOS image sensor (CIS) die and a 7 metal (6 Cu + 1 Al) image signal processor (ISP) die. The Cu-Cu vias are 3.0 µm wide and have a 14 µm pitch in the peripheral regions. In the active pixel array they are also 3.0 µm wide, but have a pitch of 6.0 µm. Note that in the images we’ve included we do see connections from the Cu-Cu via pads to both CIS and ISP landing pads.
"

11 comments:

  1. Hybrid Bonding!

    ReplyDelete
  2. This seems like a major development. Thoughts?

    ReplyDelete
  3. This can be summarized in one word : "AMAZING" !

    ReplyDelete
  4. The way sony is implementing this, there is no advantage at all compared to TSV based stacking. The contacts below the pixels are just dummy contacts. Seems the sensor for Samsung is just to test the reliability of the new process.

    ReplyDelete
  5. Why color filter and pixel are misaligned?

    ReplyDelete
    Replies
    1. Because they are at corner?
      Better comply with light with angle.

      Delete
    2. they are aligned if looking from the path of light, after lenses of specific CRA

      Delete
  6. Appears to use the DBI bonding process developed by Ziptronix (bought by Tessera). Records show that Sony licensed this technology in 2011. Is this the first commercial application that Sony has produced?

    ReplyDelete
  7. This comment has been removed by the author.

    ReplyDelete
  8. Is the bonded ISP from Sony and dedicated for certain proprietary processing only? PDAF for example. It doesn't make much sense to put a full ISP there because AP will have full ISP for sure.

    ReplyDelete
    Replies
    1. It may combine left and right parts of the dual pixels too, to output a standard bayer pattern to the ISP.

      Delete

All comments are moderated to avoid spam and personal attacks.