Lists

Sunday, October 27, 2019

Quad WRGB Pixels with S-DTI

MDPI publishes Dong-A University, Busan, Korea, paper "High-Sensitivity Pixels with a Quad-WRGB Color Filter and Spatial Deep-Trench Isolation" by Yongnam Kim and Yunkyung Kim.

"The demand for a high-resolution metal-oxide-semiconductor (CMOS) image sensor has increased in recent years, and pixel size has shrunk below 1.0 μm to allow accumulation of numerous pixels in a limited area. However, shrinking the pixel size lowers the sensitivity and increases crosstalk because the aspect ratio is worsened by maintaining the height of the pixel. This work introduces a high-sensitivity pixel with a quad-WRGB (White, Red, Green, Blue) color filter array (CFA), spatial deep-trench isolation (S-DTI), and a spatial tungsten grid (S-WG). The optical performance of the suggested pixel was analyzed by performing 3D optical simulations at 1.0, 0.9, and 0.8 μm pixel pitches as small-sized pixels. The quad-WRGB CFA is compared with the quad-Bayer CFA, and the S-DTI and S-WG are compared with the conventional DTI and WG. We confirmed an improvement in the sensitivity of the suggested pixel using the quad-WRGB CFA with S-DTI and S-WG to a maximum of 58.2%, 67.0%, and 66.3% for 1.0, 0.9, and 0.8 μm pixels, respectively."

4 comments:

  1. The text in Figure 1 is wrong. Its a 4x4 pixel array shown, not a 8x8.

    ReplyDelete
    Replies
    1. Seems correct for me, it's Quad Bayer array. 2x2 pixels under each color filter.

      Delete
    2. They also have a white pixel in a non RGBW Bayer CFA in the illustrations (a) and (b), it shall be green.

      Delete
  2. Is this what is on the 108MP Samsung Sensor?

    ReplyDelete

All comments are moderated to avoid spam and personal attacks.