Lists

Monday, June 09, 2014

Ziptronix and EVG Achieve Sub-Micron Stacked Wafers Alignment

EETimes: Ziptronix and EV Group (EVG) announce they have achieved submicron post-bond alignment accuracy on customer-provided 300mm DRAM wafers using Ziptronix's DBI Hybrid Bonding technology on an EVG Gemini FB production fusion bonder and SmartViewNT bond aligner. This approach can be used to manufacture fine-pitch 3D ICs for a variety of applications including advanced stacked image sensors.

Ziptronix Direct Bond Interconnect (DBI) Hybrid Bonding is a conductor/dielectric bonding technology that includes a variety of metal/oxide and/or nitride combinations, does not use adhesives and allows for strong, room temperature dielectric bonding, low temperature conductive bonding and finer-pitch interconnect over Cu/Cu or other metal bonding because the bond occurs between both the dielectric and the conductive surfaces, which effectively bonds the entire substrate interface area. DBI Hybrid Bonding can be used at the die or wafer level; however, wafer-level bonding enables a great cost benefit by bonding all the dice at once.

3 comments:

  1. What is the pitch showing in the cross section? Does anyone know?

    ReplyDelete
  2. The pitch for the part shown in the image is roughly 1.9um. We have since done work at the wafer level at less than 1.6um pitch.

    ReplyDelete

All comments are moderated to avoid spam and personal attacks.