Lists

Tuesday, September 02, 2014

MIPI C-PHY Offers Higher Speeds, Better Robustness

EETimes: While MIPI M-PHY is still struggling to be adopted in mobile cameras, MIPI comes up with a multi-level signalling scheme in its newest C-PHY standard proposal. "C-PHY uses a 3-pin architecture and an embedded clock. Each of the pin trios represents one lane with up to three lanes supported for a total of 9 pins. It also uses a new encoding scheme to increase the number of bits transmitted to approximately 2.28 bits per symbol. The projected data rate is 2.5 Gsymbols/s for an effective data rate of about 5.7 Gbits/s.

A further C-PHY nuance is that the signal is transmitted single-ended, but received as a differential signal. Clock is recovered from the earliest edge of the symbol transition. A delay circuit with negative hold times is used to sample data, an approach that is potentially more resistant to noise and jitter.
"

No comments:

Post a Comment

All comments are moderated to avoid spam and personal attacks.