Lists

Monday, February 11, 2019

Multispectral CFA Fabrication With Grayscale Mask

University of Cambridge paper "Grayscale-to-color: Single-step fabrication of bespoke multispectral filter arrays" by Calum Williams, George Gordon, Sophia Gruber, Timothy Wilkinson, and Sarah Bohndiek proposes grayscal photolitography for multispectral color filter manufacturing:

"Conventional cameras, such as in smartphones, capture wideband red, green and blue (RGB) spectral components, replicating human vision. Multispectral imaging (MSI) captures spatial and spectral information beyond our vision but typically requires bulky optical components and is expensive. Snapshot multispectral image sensors have been proposed as a key enabler for a plethora of MSI applications, from diagnostic medical imaging to remote sensing. To achieve low-cost and compact designs, spatially variant multispectral filter arrays (MSFAs) based on thin-film optical components are deposited atop image sensors. Conventional MSFAs achieve spectral filtering through either multi-layer stacks or pigment, requiring: complex mixtures of materials; additional lithographic steps for each additional wavelength; and large thicknesses to achieve high transmission efficiency. By contrast, we show here for the first time a single-step grayscale lithographic process that enables fabrication of bespoke MSFAs based on the Fabry-Perot resonances of spatially variant metal-insulator-metal (MIM) cavities, where the exposure dose controls insulator (cavity) thickness. We demonstrate customizable MSFAs scalable up to N-wavelength bands spanning the visible and near-infrared with high transmission efficiency (~75%) and narrow linewidths (~50 nm). Using this technique, we achieve multispectral imaging of several spectrally distinct target using our bespoke MIM-MSFAs fitted to a monochrome CMOS image sensor. Our unique framework provides an attractive alternative to conventional MSFA manufacture, by reducing both fabrication complexity and cost of these intricate optical devices, while increasing customizability."

2 comments:

  1. Silver based optical filter... looks challenging to ensure manufacturability and reliability. CEA-LETI from France did show nice demonstrations of such type of Ag-based filters few years ago: does anyone understands the difference with these here and have seen them in any product(s) yet?

    ReplyDelete
  2. Interesting. Could you share some link to this work, and to the reliability issues with it?

    ReplyDelete

All comments are moderated to avoid spam and personal attacks.