Lists

Thursday, October 15, 2020

Camera Array for Multi-Spectral Imaging

IEEE Transactions on Image Processing publishes a paper "Camera Array for Multi-Spectral Imaging" by Nils Genser, Jürgen Seiler, and André Kaup from Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Germany, that might justify even more cameras in smartphones than it's used now.

"Recently, many new applications arose for multi-spectral and hyper-spectral imaging. Besides modern biometric systems for identity verification, also agricultural and medical applications came up, which measure the health condition of plants and humans. Despite the growing demand, the acquisition of multi-spectral data is up to the present complicated. Often, expensive, inflexible, or low resolution acquisition setups are only obtainable for specific professional applications. To overcome these limitations, a novel camera array for multi-spectral imaging is presented in this article for generating consistent multi-spectral videos. As differing spectral images are acquired at various viewpoints, a geometrically constrained multi-camera sensor layout is introduced, which enables the formulation of novel registration and reconstruction algorithms to globally set up robust models. On average, the novel acquisition approach achieves a gain of 2.5 dB PSNR compared to recently published multi-spectral filter array imaging systems. At the same time, the proposed acquisition system ensures not only a superior spatial, but also a high spectral, and temporal resolution, while filters are flexibly exchangeable by the user depending on the application. Moreover, depth information is generated, so that 3D imaging applications, e.g., for augmented or virtual reality, become possible. The proposed camera array for multi-spectral imaging can be set up using off-the-shelf hardware, which allows for a compact design and employment in, e.g., mobile devices or drones, while being cost-effective."

1 comment:

  1. If the idea is to add multi-spectral imaging to phones, then it'd be more efficient to add CFA based spectral differentiation than add many cameras. There's no more room on the phones. For ex. use a 12MP 1.0um sensor with 3x3 multi-spectral CFAs to get a ~1.3MP multispectral image.

    ReplyDelete

All comments are moderated to avoid spam and personal attacks.