Lists

Wednesday, June 30, 2021

SPAD Imaging with No Pile-Up

Politecnico di Milano, Italy, publishes an open access paper in Review of Scientific Instruments "Toward ultra-fast time-correlated single-photon counting: A compact module to surpass the pile-up limit" by S. Farinaa,  G. Acconcia, I. Labanca,  M. Ghioni, and  I. Rech.

"Time-Correlated Single-Photon Counting (TCSPC) is an excellent technique used in a great variety of scientific experiments to acquire exceptionally fast and faint light signals. Above all, in Fluorescence Lifetime Imaging (FLIM), it is widely recognized as the gold standard to record sub-nanosecond transient phenomena with picosecond precision. Unfortunately, TCSPC has an intrinsic limitation: to avoid the so-called pile-up distortion, the experiments have been historically carried out, limiting the acquisition rate below 5% of the excitation frequency. In 2017, we demonstrated that such a limitation can be overcome if the detector dead time is exactly matched with the excitation period, thus paving the way to unprecedented speedup of FLIM measurements. In this paper, we present the first single-channel system that implements the novel proposed methodology to be used in modern TCSPC experimental setups. To achieve this goal, we designed a compact detection head, including a custom single-photon avalanche diode externally driven by a fully integrated Active Quenching Circuit (AQC), featuring a finely tunable dead time and a short reset time. The output timing signal is extracted by using a picosecond precision Pick-Up Circuit (PUC) and fed to a newly developed timing module consisting of a mixed-architecture Fast Time to Amplitude Converter (F-TAC) followed by high-performance Analog-to-Digital Converters (ADCs). Data are transmitted in real-time to a Personal Computer (PC) at USB 3.0 rate for specific and custom elaboration. Preliminary experimental results show that the new TCSPC system is suitable for implementing the proposed technique, achieving, indeed, high timing precision along with a count rate as high as 40 Mcps."

1 comment:

  1. No pile-up only if the incoming photon rate is known (for example, excitation rate of a sample in FLIM). In a generic scene or depth sensing application, this isn't known. So, the problem remains.

    ReplyDelete

All comments are moderated to avoid spam and personal attacks.